[Zaurus] 設定神腦粉紅CF無線網卡( SL-2511CF MERCURY )

聽說之前的藍卡就不用這麼麻煩了。
參考以下的說明
http://www.shirtpocket.co.uk/spforum/index.php?showtopic=42

It looks like there has been some internal changes to the Senao/Origo WiFi Cards.

The latest batch we received come with lovely new packaging, but no longer work "Out of the box" with the Zaurus 5500/5600/C700/C750/C750/C860.

Someone has already figured out how to get them to work and posted instructions on what changes need to be made.

See the ZUG link for source of this information :

link

Below is a repeat of what you need to do on the standard Sharp based rom.

We have also included an updated file with values based on those shown below at the bottom of this post.
If you prefer, you could try simply copying the file over the existing file listed below instead of editing it etc. (Keep in mind that any other changes you made to the file would be lost)
Note, file permissions for this file are owner: root, group: root, rw,r,r (chmod 644).

Basicly, you need to add the details for the new card to a configuration file. Once you do that it works fine.

The following info. works for standard Sharp based ROMs.

Note: These changes may already have been added for C7xx/860 units purchased from ShirtPocket.

You will need to make some changes to a text file via terminal or console.

If you don't want to use vi, you may want to install another console based editor such as ee (Easy Editor). See HERE

1. Plug in your card.

2. Bring up terminal and log in as root (su).

3. Enter the command "cardctl ident"

4. From the output :
For Socket 0, copy the details of the first line after "product info :"
Probably the same for all new style cards. On the ones we tested, it says (including first and last quote):
"WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA"

5. Backup the file "/etc/pcmcia/wlan-ng.conf" (Just in case) by entering the command cp /etc/pcmcia/wlan-ng.conf /etc/pcmcia/wlan-ng.conf.old

6. Edit file "/etc/pcmcia/wlan-ng.conf" At the end add the following

card "Origo" (or some other description, not important)
version "WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA" (or ident for your card if different)
bind "prism2_cs"

7. Save and exit file and reboot your unit.

Already updated file is available for download HERE (Use right click save target as).

MAKE SURE YOUR WEB BROWSER DOES NOT SAVE IT AS A TEXT FILE (PUT A TXT EXTENSION ON THE END)

--
Posted by woody to Zaurus at 7/20/2005 08:27:00 下午